Inspect The Engine Air Filter - Genie ZX-135/70 Service Manual

Service Manual
Checklist B Procedures
12 Turn the service bypass/recovery key switch
to the service bypass position.
13 Raise the boom.
Result: The boom should raise.
14 Remove the key from the service
bypass/recovery key switch and insert the key
into the main key switch.
15 Turn the main key switch to the off position.
16 Remove the key from the main key switch and
insert the key into the service bypass/recovery
key switch.
17 Turn and hold the service bypass/recovery
key switch to the recovery position.
Result: The boom should return to the stowed
position.
18 Turn the service bypass/recovery key switch
to the run position.
19 Remove the key from the service
bypass/recovery key switch and insert the key
into the main key switch.
20 Turn the main key switch to the off position.
21 Close the turntable side cover.
34
B-4

Inspect the Engine Air Filter

Genie specifications require that this procedure be
performed every 250 hours or quarterly, whichever
comes first.
Maintaining the engine air filter in good condition is
essential to good engine performance and service
life. Failure to perform this procedure can lead to
poor engine performance and component damage.
Note: Perform this procedure with the engine off.
1 Open the engine side cover. Empty the dust
discharge valve by pressing together the
sides of the discharge slot. Clean the
discharge slot as needed.
1 clamp
2 cannister end cap
3 dust discharge valve
ZX-135/70
August 2014
Part No. 218700