Install The Bezel (Optional); Install The System Into Rack (Optional); Figure 82. Slides Component - Intel R2000LH2 Service Manual

Install the Bezel (Optional)

Install the System into Rack (Optional)

Caution: The maximum recommended server weight for the rack rails can be found at
http://www.intel.com/support/motherboards/server/sb/CS-033655.htm. Exceeding the maximum
recommended weight or misalignment of the server may result in failure of the rack rails holding
the server. Use of a mechanical assist to install and align server into the rack rails is
recommended.
Note: The Extended Value rack mount rail kit (AXXELVRAIL) supports the system weight of ~65lbs
fully loaded. However, the rail travel limitation does not allow removal of the top cover during
normal operation, impacting hot swapping of the system fans. The Premium rack mount rail kit
(AXXPRAIL) will be available at post launch to eliminate the hot swap fan limitation.
This section helps you to install the system into a rack with AXXELVRAIL.
®
Intel Server System R2000LH2/LT2 Service Guide
Label Description Label
A Front Bracket D
B Outer Member E
C Rear Bracket F

Figure 82. Slides Component

Hardware Installations and Upgrades
Description
Inner Member
Safety Locking Pin
Release Button
57