Hot Swap Drive Cage Upgrade Install Instructions (Optional); Before You Begin; Kits Required; Tools And Supplies Needed - Intel SC5650-DP Service Manual

3
Hot Swap Drive Cage Upgrade Install
Instructions (optional)
The fixed hard drive cage that ships with your Intel
upgradeable to a hot swap drive cage with a SAS/SATA backplane. See your Intel
Representative for ordering information.
You can install up to six hot swap hard drives in the optional hot swap drive cage. Power
requirements for each individual hard drive may limit the maximum number of drives that
can be integrated into the server chassis.
Note: The Intel
Information and Software"

Before You Begin

Before working with your server product, review the important safety information listed
in Appendix A, "Safety

Kits Required

•
A hot swap conversion kit or a hot-swap drive cooling and mounting kit (part number:
APP3HSDBKIT or APPTHSDBKIT).
OR
•
A SAS/SATA backplane with expander (part number AXX6DRV3GEXP).
OR
•
A hot swap drive cage kit with a SAS/SATA backplane without expander (part
number AXX6DRV3GR)

Tools and Supplies Needed

•
Phillips* (cross head) screwdriver (#1 bit and #2 bit)
•
Needle-nosed pliers
•
Anti-static wrist strap and conductive foam pad (recommended)

System References

All references to the left, right, front, top, and bottom assume the reader is facing the front
of the chassis as it would be positioned for pedestal operation.
®
Intel Server Chassis SC5650-DP/WS/BRP/UP Service Guide
®
Server Chassis SC5650 does not support all hard drives. See
for a web link to a list of supported hard drives.
Information".
®
Server Chassis SC5650 is
"Additional
61