Hardware Installations and Upgrades
Removing the Intel
1. Slide out the plastic battery holder (see letter A).
2. Lift the battery up to remove it from the server chassis (see letter B).
Installing and Removing the Server Board
Before installing or removing the server board, please make sure following steps are performed.
1. Ensure the AC power cord(s) are disconnected from the system.
2. Remove the system cover. For instructions, see
3. Remove the power supply modules. For instructions, see
4. Remove the PCI riser assemblies. For instructions, see
5. Remove the air duct. For instructions, see
6. Remove the processor heatsink(s). For instructions, see
7. Remove the processor(s). For instructions, see
8. Remove the memory. For instructions, see
®
9. Remove all the Intel
Module.
®
10. Remove Intel
Remote Management Module 4. For instructions, see
®
Intel
Remote Management Module
46
®
RAID Smart Battery
Figure 69. Removing the Intel
Removing the Air
Removing
I/O expansion module(s). For instructions, see
4.
®
RAID Smart Battery
Removing the System
Cover.
Removing the Power Supply
Removing the PCI Riser
Duct.
Removing Processor
Installing or Replacing the
Memory.
Removing Intel
Installing and Removing the
®
Intel
Server System R2000LH2/LT2 Service Guide
Module(s).
Assembly.
Heatsink(s).
Processor.
®
I/O Expansion