Starting The Program - Extron electronics SMX System User Manual

2.
Click the
3.
Scroll to the SMX Control Program and click
4. Follow the on-screen instructions. The installation program creates a
Files\Extron\SMX
Within this folder are created three icons for the SMX Control pgm, SMX Help, Uninstall
SMX Control pgm.

Starting the Program

1.
Click
Start > Programs > Extron Electronics > SMX Control
Program > SMX Control Pgm
installation).
The Comm Port Selection window appears.
2.
Choose the comm (serial) port that is connected to the SMX or
NOTE:
tab.
Software
folder.
(or select the desktop icon, if created during
For a comm port, check the baud rate displayed in the comm port selection
window. To change the baud rate, click the
desired baud rate from the list.
SMX System MultiMatrix Switcher • SMX Control Software
Install .
C:\Program
IP [LAN]
button and select the
Baud
.
60