Installation And Cabling; Ul Safety Requirements - Extron electronics SMX System User Manual

Multimatrix switcher
Hide thumbs Also See for SMX System:
Table of Contents

Advertisement

Installation and
Cabling
This section describes how to mount the SMX frame, install the I/O boards, and connect
cables to the SMX device. Topics in this section include:

UL Safety Requirements

The requirements listed below pertain to the safe installation and operation of this SMX.
Important safety instructions:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
UL Safety Requirements
Rear Panel Features and Connections
SMX Frame and I/O Board Installation
Wiring the Audio Connectors
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer
instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produces heat.
Do not defeat the safety purpose of the polarized or grounding type plug. A polarized
SMX System asdfasMultiMatrix Switcher • Installation
plug has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the third plug are provided for
your safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer,
or sold with the apparatus. When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally, or has been dropped.
SMX MD System MultiMatrix Switcher • Installation
6
6 6

Advertisement

Table of Contents
loading

This manual is also suitable for:

Multimatrix switcher

Table of Contents