Table of Contents
Advertisement
Date/Time Settings fields
The Date/Time Settings section (see
the time functions.
Figure 52.
Date/Time Settings Fields
Change the date and time settings as follows:
1.
Click the drop-down box for the desired variable. The adjustable variables are month,
day, year, hours, minutes, am/pm, and (time) zone (see
2.
Click the scroll up or down buttons until the desired variable is visible.
3.
Click on the desired variable.
NOTES:
•
If setting the time, set the local time. The
enter the offset from Greenwich Mean Time (GMT).
•
The
field identifies the standard time zone that has been selected
Zone
and displays the amount of time, in hours and minutes, that the local time
varies from the GMT international time reference.
4.
Repeat steps 1 through 3 for other variables that need to be changed.
5.
Select the appropriate
Daylight Saving
time, select
Off
.
NOTE:
When daylight savings time is enabled, the switcher updates its internal
clock between Standard Time and Daylight Savings Time in the spring and
fall on the date that the time change occurs in the United States of America
and parts of Europe and Brazil. When daylight savings time is turned off, the
switcher does not adjust its time reference.
6.
Click the
button at the bottom of the Date/Time Settings section to implement
Submit
the selections.
SMX System MultiMatrix Switcher • HTML Configuration and Control
figure
52) provides a location for viewing and setting
figure
Zone
radio button. To turn off daylight savings
52).
variable allows you to then
93
Advertisement
Table of Contents
