Extron electronics SMX System User Manual page 27

Multimatrix switcher
Hide thumbs Also See for SMX System:
Table of Contents

Advertisement

Muting an output
To mute an output signal, do the following:
1.
Press and release the Esc button to clear all pending changes.
2.
Press and release the View button, which lights red. The previously selected plane button
and untied output buttons light (see
muted. Tied outputs remain unlit.
NOTE:
For video signals, output buttons light or flash green; for audio signals, the
buttons light or flash red, and for video and audio signals, the buttons light
or flash amber.
Step 2.
Press and release the View button (lights
C O N T R O L
VIEW
ESC
ENTER
PRESET
The last plane button used lights.
Step 3.
Press and release the desired I/O Plane (here plane 2).
The plane button and any untied outputs light. Muted outputs flash. Tied outputs remain unlit.
I/O PLANE SELECT
0
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Figure 17.
Muting Output Signals — an Example (Steps 2 and 3)
3.
Select the applicable plane which lights. The output buttons light if they are untied or
flash if they are tied and muted in the signal type color. Tied outputs remain unlit.
4.
Press and hold the desired output button for 2 seconds or until the button flashes, then
release. The signal is now muted (see
NOTE:
If the button flashes red, the audio signal is muted. If the button flashes
green, the video signal is muted. If it flashes amber, both are muted.
Step 4.
Press and hold the desired output buttons for 2 seconds.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
OUTPUTS
Each selected button flashes (green, red, or amber).
Figure 18.
Muting Output Signals — an Example (Steps 4 and 5)
5.
Press and release the View button. All buttons extinguish.
NOTE:
For video, only RGB is muted. Sync is not muted.
figure
17), or flash if the outputs are already
red).
INPUTS
OUTPUTS
figure
18).
INPUTS
SMX System MultiMatrix Switcher • Operation
Step 5.
Press and release the
View button.
C O N T R O L
ENTER
PRESET
VIEW
ESC
All buttons
extinguish.
21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Multimatrix switcher

Table of Contents