Table of Contents
Advertisement
Master-Reset
Select this menu only if a master reset to faculty defaults is desired. It opens a warning
window stating the consequences of this action. Click
Yes
to proceed and complete the reset.
Help
This menu gives access to the SMX Control program help file, and displays limited SMX
configuration information.
Figure 36.
Help Menu
Select
to view a help file that can orient you through the various menus and
Contents
commands.
The configuration information (not selectable or configurable) section shows:
•
Model type and slot count (here a 3U SMX with 6 slots and front panel control)
•
Board signal configuration (here 8x8 video inputs and outputs)
•
Firmware version (here 1.14)
•
Login mode (here logged in as ADMINISTRATOR)
•
Unit connection (here IP/LAN with the default IP address)
Select
to open two windows.
Firmware
Figure 37.
Firmware Version and RS-232 Monitor Window
The first shows the SMX main firmware version and build number (version 1.14, build 0041
in the example above).
The second window is the RS-232 monitor and shows the switcher response.
Select
About this Program
pop-up window.
No
to see the software version number. Click
SMX System MultiMatrix Switcher • SMX Control Software
if the reset is not required. Click
to close the
OK
74
Advertisement
Table of Contents
