Table of Contents
Advertisement
5.
Execute a ping command by entering
at the command prompt. For example:
ping 10.13.197.7
You must ping the SMX in order for the IP address change to take place. The response
should show the new IP address, as shown in the following picture.
Figure 66.
To verify that the update was successful, reconnect using either Telnet or a Web browser.
6.
After verifying that the IP address change was successful, enter the
the DOS prompt. For example:
arp -d 10.13.197.7
arp -d*
Connect as a Telnet Client
The Microsoft Telnet utility is available from the command window. Telnet allows you to
input SIS commands to the SMX from the PC via the Ethernet link and the LAN.
Access the
1.
From the Windows Start menu, navigate to and select
> Command Prompt
NOTES: The command prompt can also be accessed from the
3.
At the prompt, enter
Figure 67.
Ping Command
removes 10.13.197.7 from the ARP table or
removes all static IP addresses from the ARP table.
window and start Telnet as follows:
command
. A
DOS command
•
For Windows 7, click the Windows
Search Programs and Files
•
For older Windows operating systems, click the Windows
and select
Run...
. In the Run window, enter
and click
.
OK
. A display similar to
telnet
Telnet Screen
SMX System MultiMatrix Switcher • Ethernet Control
ping
followed by a space and the new IP address
All Programs > Accessories
window opens.
Run...
Start
menu, and enter
field. Select
from the list.
Cmd
command
figure 67
opens.
command at
arp -d
field.
cmd
in the
menu
Start
in the
Open
field
109
Advertisement
Table of Contents
