Extron electronics SMX System User Manual page 51

Command ASCII Command
(Host to Switcher)
Front Panel Lockout (Executive Mode)
2X
Lock front panel
(advanced functions)
1X
Lock front panel
Unlock front panel 0X
View front panel lock X
NOTE:
For full lock mode details, see
Information Requests
NOTE:
Firmware version/part number/information Primary BME only.
Query firmware version Q
Example: Q
*Q
Query firmware and build
version
**Q
Query kernel firmware and
build version
Query verbose version 0Q
information
NOTE:
The firmware that is currently running is marked by an asterisk (*). A question mark (?.??) indicates that only
factory firmware is loaded. A caret (^) indicates the firmware that should be running, but a Mode 1 reset was
executed and the default factory version is loaded. An exclamation point (!) indicates corrupted firmware.
Example 0Q
Response: Description
|
1.23 - 0.14(0.20-SMX Series - Wed, 04 Jan 2006 23:11:29 GMT) - 1.00*(0.24-SMX Series - Thu, 20 Apr 2007 20:02:35 GMT)
Ethernet protocol
firmware
1Q
Query firmware version
2Q
Query bootstrap version
Query factory firmware 3Q
version
Ver03*
4Q
Query updated firmware
version
Ver04*
NOTE:
The 3Q and 4Q responses indicate the web version, a brief description (model used on), and the date the
last version was uploaded. For example, a typical 4Q response is; [1.14*(1.77-SMX Series -Wed, 01
Apr 2011 18:35:43 GMT)], indicating loaded firmware version is 1.14, web version is 1.77 for the SMX,
uploaded Wednesday, April 1st 2011 at 6:35 pm GMT).
NOTES: X(
= Lock mode status:
X2!
= Version number
Setting the Front Panel Locks (Executive Modes)
* indicates the version running
SMX firmware version
X2!]
(plus ver.-desc-upload date/time)
X2!]
(plus web ver.-desc-upload date/time)
SMX System MultiMatrix Switcher • SIS Configuration and Control
Response
(Switcher to Host)
]
Exe2
]
Exe1
]
Exe0
X(]
X2!]
]
1.14
X2!]
Ver01*
X2!]
X2!]
Bld
X2!]
X2!]
Lib
2Q-3Q-4Q
Sum of responses from
Ver00* sum of responses from 2Q-3Q-4Q
|
Updated firmware version
X2!]
X2!]
Ver01*
X2!]
X2!]
Ver02*
X2!]
(plus web ver.-desc-upload
date/time)
]
X2!]
(plus web ver.-desc-upload
]
date/time)
]
0 = disabled, 1 = enabled, 2 = enabled (basic only)
x.xx
Additional Description
Enable lock mode 2.
Enable lock mode 1.
Disable lock mode.
Show lock mode status.
on page 25.
The firmware version is
1.14.
Verbose mode 2 or 3
Verbose mode 2 or 3
Verbose mode 2 or 3
]
]
verbose response
Upload date and time
|
Verbose mode 2 or 3
Verbose mode 2 or 3
Verbose mode 2 or 3
Verbose mode 2 or 3
45