Extron electronics SMX System User Manual page 125

Multimatrix switcher
Hide thumbs Also See for SMX System:
Table of Contents

Advertisement

Video output — SMX 44/48/84/88 DVI PRO
Number/signal type ........................ 4 or 8 (depending on model) digital RGB single link DVI-D (or HDMI*)
Connectors .................................... 4 or 8 female DVI-I (digital only)
Re-clocking .................................... Automatic
Peripheral device power ................. 250 mA per output
Video — SMX 44/48/84/88 HDMI
NOTE: *Appropriate HDMI to DVI-D cables or adapters are required for DVI signal input/output.
Routing
SMX 44 HDMI ......................... 4 x 4 matrix
SMX 48 HDMI ......................... 4 x 8 matrix
SMX 84 HDMI ......................... 8 x 4 matrix
SMX 88 HDMI ......................... 8 x 8 matrix
Gain ............................................... Unity
Resolution range ............................ Up to 1920x1200 or 1080p @ 60 Hz
Signal type ..................................... Single-link HDMI (or DVI-D*)
Digital video ............................ RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video
NOTE: These SMX HDMI Series boards are compatible with HDMI 1.3.
Digital audio ............................ Supports HDMI audio transmitted through the RGB and Y, Cr, Cb lines, actively
Consumer Electronics Control (CEC)
EDID and DDC ......................... Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC)
HDCP ...................................... Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and
HPD ......................................... Supports hot plug detection (HPD) of display as a pass-through signal.
Maximum data rate ........................ 6.75 Gbps (2.25 Gbps per color)
Maximum pixel clock ...................... 225 MHz
Standards ....................................... DVI 1.0, HDMI 1.3
Switching speed ............................. 200 ns, max.
Video input — SMX 44/48/84/88 HDMI
Number/signal type ........................ 4 or 8 (depending on model) digital RGB single-link HDMI (or DVI-D*)
Connectors .................................... 4 or 8 female HDMI type A
Equalization ................................... Automatic
Input cable length .......................... >100' (30 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p; 8 bit color
NOTE: The transmission distance varies depending on the signal resolution and on the type of cable, graphics card,
and display used in the system.
Video output — SMX 44/48/84/88 HDMI
Number/signal type ........................ 4 or 8 (depending on model) digital RGB single-link HDMI (or DVI-D*)
Connectors .................................... 4 or 8 female HDMI type A
Re-clocking .................................... Automatic
Peripheral device power ................. 250 mA per output
(HDMI), actively buffered (supports all single-link DVI (if using an optional adapter)
and HDMI standards from 640x480 @ 60 Hz to 1600x1200 @ 60 Hz computer
video)
buffered.
Not supported
data using DVI and HDMI standards. EDID and DDC signals are actively buffered.
HDMI 1.3 standards
SMX System MultiMatrix Switcher • Reference Information
119

Advertisement

Table of Contents
loading

This manual is also suitable for:

Multimatrix switcher

Table of Contents