Table of Contents
Advertisement
EDID settings — Select this option to set the EDID settings for selected inputs, and to
•
save the output to any of four user defined outputs.
Select
Advanced Info
right
side image), and to save a record to a User defined ID (User 1-4).
NOTE:
The drop-down list has 41 selections, where:
(1024x768 @ 60 Hz),
-
is data stored from connected EDID monitors as reference,
1
8
factory fixed rates, and
= User 3,
39
•
HDCP Status — Select this option to view whether inputs or outputs are connected
with HDCP compliance. This information can also be viewed by selecting
.
Settings
•
USB Settings/Status — Select this option to view the connection status and port
emulation settings for USB boards. Select the numbered check boxes in the Port
Emulation section to enable or disable the port emulation feature of SMX USB boards.
•
View Input Frequencies — Select this to view the horizontal
and vertical frequencies for any input. Click
update the list.
NOTE:
If the
Frequency-read options
the
Preferences
Input Frequencies
to view the EDID data for any selected output (see the
is the default for DVI-Pro (720p),
32
37
-
40
are user assignable (
= User 4). See the
EDID table
40
Refresh
setting under
menu is set to
None
, then
is not available.
SMX System MultiMatrix Switcher • SMX Control Software
above
15
is the default for DVI
= automatic,
0
-
9
26
37
= User 1,
38
= User 2,
on page 41 for the full list.
EDID
to manually
View
are
67
Advertisement
Table of Contents
