Table of Contents
Advertisement
Ties as Lines — Selecting this option displays input to output ties as lines.
•
•
Ties as Crosspoints — Selecting this option displays input-to-output ties as points.
The crosspoints diagram is shown as a matrix with ties that have been made indicated by
green boxes. Pending ties that will be made after the
while ties that will be broken appear as a
•
Frequency-read options — Selecting this option displays a sub-menu with three
selectable items:
Automatically every 10 seconds
and
None
. Select the input read and update frequency as desired.
NOTE:
When the
Frequency-read options
Input Frequencies
•
Icons in I/O Boxes — Select this option to show user-assigned icons, or numbers in
sequence in the I/O boxes (see the
Numbers in I/O boxes — Select this to have the input/output number displayed in the
•
boxes.
•
Catch FPC/other's changes — Select this option to have the SMX report all
configuration and setting changes via the remote RS-232, RS-422, or Ethernet
connection. These reports allow the SMX Control Program to track the changes that
occur in the switcher configuration and settings, whether commanded via the front
panel, the RS-232/RS-422 port, or the Ethernet port.
in the Crosspoint box.
-
setting is set to
option on the
Tools
Customizing the SMX Window
SMX System MultiMatrix Switcher • SMX Control Software
Take
button is clicked appear as a
,
On Demand (or by Refresh)
, the
None
View
menu is not available.
section on page 75).
+
,
73
Advertisement
Table of Contents
