Table of Contents
Advertisement
5.
Lift out the transparent square label that you want to replace. You may need to use the
small screwdriver to gently pry the label out.
6.
Insert one of the new labels you created in step 1 into the clear button cap, align the
white backing plate with the cap, and firmly snap it into place.
7.
Gently, but firmly, press the reassembled button into place on the SMX front panel.
8.
Repeat steps 1 through 7 as needed to relabel other buttons.
SMX System MultiMatrix Switcher • Reference Information
129
Advertisement
Table of Contents
