Step 2.
Press and release a VGA or RGBHV plane button (lights green or amber).
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
0
Step 3.
Press and hold the View button until the plane button flashes
ENTER
PRESET
Step 4.
Press and release the output button to be delayed (here output 8).
Input buttons light to show the current RGB delay (here 2.5 seconds).
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Figure 22.
6.
Press and release the Enter button to save the settings and exit the RGB delay mode.
Setting the Front Panel Locks (Executive Modes)
The SMX has three levels of front panel security lock that limit the operation of the switcher
from the front panel. The three levels are:
Lock mode 0X — The front panel is completely unlocked, and all front panel controls
•
are available. Basic and advanced features are available.
•
Lock mode 1X — All changes are locked from the front panel (except for setting Lock
mode 2). Only View mode is available.
•
Lock mode 2X — Basic functions are unlocked. Advanced features are locked and can
be viewed only (default mode).
Basic features consist of:
Making ties
•
Saving and recalling presets
•
Setting input audio gain and attenuation
•
Changing Lock modes
•
Advanced features consist of:
Setting video and audio output mutes
•
Setting audio output volume
•
Setting RGB delay (VGA, RGBHV boards)
•
Setting the rear panel report port protocol and baud rate
•
NOTE:
I/O PLANE SELECT
C O N T R O L
0
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
VIEW
ESC
INPUTS
OUTPUTS
Step 5. Press View to decrease or Esc to increase the delay.
Setting RGB Delay — an Example (Steps 2 through 5)
The SMX is shipped from the factory in lock mode 2 (see
and Control
on page 33 to set lock modes using SIS commands).
I/O PLANE SELECT
C O N T R O L
ENTER
PRESET
VIEW
ESC
The maximum RGB delay is 5
seconds.
SMX System MultiMatrix Switcher • Operation
SIS Configuration
25