Table of Contents
Advertisement
Saving or recalling a global preset
1.
Press the Esc button to clear all pending changes. The button flashes green once.
2.
Saving a global preset — Press and hold the Preset button until it flashes red.
OR
Recalling a global preset — Press and release the Preset button (lights red). All
previously saved presets also light red.
Step 2.
To save a global preset,
press and hold the Preset
button until it flashes
red.
C O N T R O L
ENTER
PRESET
VIEW
ESC
NOTE: To recall a global preset, press and release the Preset button (lights
Step 3.
Press and release the desired (unlit or lit) input or output
button (here output 5, preset 21). The button flashes red.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
OUTPUTS
NOTE: To recall a global preset, press and release a lit Preset
Figure 20.
Saving or Recalling a Global Preset — An Example
(Steps 2 through 4)
3.
Press and release a desired input or output button to select the address to save the
current configuration to. The Address, Preset, and Enter buttons flash red.
NOTE:
A preset can be saved to any lit or unlit button. Only presets with lit buttons
can be recalled. When a preset is saved to a lit (previously saved button, the
stored data is overwritten with the new data. Only one preset can be saved
to an address at a time.
4.
Press and release the Enter button. The preset is saved or recalled as specified.
Saving or recalling a plane preset
1.
Press the Esc button to clear all pending changes. The button flashes green once.
2.
Saving a plane preset — Press and hold the Preset button until it flashes red, then
select a plane.
OR
Recalling a plane preset — Press and release the Preset button , which lights red. All
previously saved presets light red, then select a plane.
NOTE:
Lit presets are global presets, not plane presets.
3.
Press and release a plane button. The button lights.
NOTE:
The lit buttons for global presets extinguish, and the buttons for any saved
plane presets light.
Buttons for any previously saved presets light red
(here preset 8, 18, and 32).
INPUTS
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
OUTPUTS
INPUTS
Enter button also blinks (red).
SMX System MultiMatrix Switcher • Operation
red).
Step 4.
Press the Enter button
to save or recall preset.
C O N T R O L
VIEW
ESC
ENTER
PRESET
All buttons
extinguish.
button.
23
Advertisement
Table of Contents
