Table of Contents
Advertisement
NOTES:
•
If a video tie is removed from a video and audio tie, the button turns red
(from amber).
•
If an audio tie is removed from a video and audio tie, the button turns
green (from amber).
•
If a single signal tie (video or audio) is removed, or there is a combined sig-
nal (the Video & Audio signal type button is highlighted), the Video Only
or Audio Only button turns gray (see
4.
Click
to make the tie. The screen refreshes, the letter "P" disappears from the
Take
button, and the SMX is updated, removing the selected tie.
To set input audio levels
1.
In the Input Adjustments section, click in the desired input audio level field. A drop-
down list of dB values (+24 to -18 dB) appears (see
Figure 59.
Drop-down List of dB Values
2.
Scroll down to the desired level and click. The page refreshes and the device updates to
the selected level.
SMX System MultiMatrix Switcher • HTML Configuration and Control
figure
58, input 6, output 7).
figure
59, input 4).
100
Advertisement
Table of Contents
