Table of Contents
Advertisement
Virtualize... — Select this option to view and set up to 10 virtual planes. Select a
•
check box then select the desired
Virtual Plane
Select
. New tabs for the virtual planes (planes 1 and 5 in the example below)
Take
appear on the inputs page. This recreates configurations from current boards and
configurations onto virtual planes.
Name Presets — Select this to assign or edit preset names.
•
Audio-input-Config
NOTE:
This menu title is grayed-out until an audio plane is selected.
Upon selection of this menu, the Configure Audio Options window opens.
Configure Audio Options — Sets the dB gain per audio input.
•
Click on the applicable
verifiable.
Verify
(default setting) allows accepting the changes via a
•
removes the
Immediate
•
immediately.
In the window, click on the up or down arrow for the an input until you reach the
desired gain value (range is -18 to 24 dB, default 0 dB), then click
is black for current values, but turns red when changes are pending or green when the
pending change is returned to its original value. Click
If you desire default values (0 dB), click
radio buttons to have the changes either immediate or
Changes
button from the window and all changes are made
Take
Use Defaults
SMX System MultiMatrix Switcher • SMX Control Software
check boxes.
Physical Planes
Take
button.
. The dB value
Take
to confirm pending changes.
Take
.
71
Advertisement
Table of Contents
