Table of Contents
Advertisement
To remove a tie
Drag the output box outline to its tied input box or to the trash can.
•
If
Hold/Verify Changes
line becomes broken.
NOTE:
Click
Take
•
If
Immediate Changes
removed immediately.
To view information on an input or output
Position the cursor over that device in the matrix window. A pop-up window opens, showing
the input and output numbers, names (if captions were specified), details on the connections
to that device, and the frequency of the video signal being sent to or from it (see
Figure 39.
IP Settings/Options
The IP Settings/Options window (see
via the RS-232 or RS-422 link or if you are logged on via the Ethernet port as an
administrator, edit settings unique to the Ethernet interface. None of the fields on this screen
can be edited while you are logged on as a user.
To display the IP Settings/Options window, select
has been selected from the
If you want to reinstate the tie, click
to remove the tie. The broken tie line disappears.
has been selected from the
Matrix Window Section with Output 1 Pop-up Information
figure
SMX System MultiMatrix Switcher • SMX Control Software
Preferences
. The line becomes solid.
Cancel
menu, the tie is
Preferences
40) lets you view and, if the SMX is connected
from the
IP Options
menu, the solid tie
figure
39).
menu.
Tools
77
Advertisement
Table of Contents
