Saving Or Recalling A Preset; Setting The Front Panel Locks (Executive Modes) - Extron electronics XTP II CrossPoint 1600 Setup Manual

Saving or Recalling a Preset

A "preset" is a configuration that has been stored.
1. Save a preset — Press and hold the
blinks.
Save a
preset
Recall a preset — Press and release the
Recall a
preset
2. Press and release the desired input or output button.
3. Press and release the

Setting the Front Panel Locks (Executive Modes)

The matrix switcher has three levels of front panel security lock
that limit the operation of the matrix switcher from the front panel.
The three levels are:
Lock mode 0 — The front panel is completely unlocked.
•
Lock mode 1 — All functions are locked from the front panel
•
(except for setting Lock mode 2). Some functions can be
viewed.
Lock mode 2 — Basic functions are unlocked. Advanced
•
functions are locked and can be viewed only.
Basic functions consist of:
Making ties
•
Saving and recalling presets
•
Setting input audio gain and attenuation
•
Changing Lock modes
•
2 seconds
PRESET
Press and hold.
PRESET
Press and release.
All input and output buttons with assigned presets light red.
When a preset is saved, the configuration data at
assigned preset locations is overwritten.
1 2 3
The button blinks red to indicate that
this preset is selected to save or recall.
The Enter button blinks
1
ENTER
red to indicate the need to
activate the save or recall.
XTP II CrossPoint Series • Front Panel Operations
Preset
PRESET
The Preset button blinks.
PRESET
The Preset button lights.
INPUTS
4 5 6 15
button.
Enter
button until it
button.
Preset
16
20