Setting The Front Panel Locks (Executive Modes); Selecting Lock Mode 2 Or; And Mode - Extron electronics CrossPoint 450 Plus Series Setup Manual

Setting the Front Panel Locks (Executive Modes)

The matrix switcher has three levels of front panel security lock
that limit the operation of the switcher from the front panel. The
three levels are:
Lock mode 0 — The front panel is completely unlocked.
Lock mode 1 — All changes are locked from the front panel
(except for setting Lock mode 2). Some functions can be viewed.
Lock mode 2 — Basic functions are unlocked. Advanced features
are locked and can be viewed only.
Basic features consist of:
•
•
•
•
Advanced features consist of:
•
•
NOTE:
Selecting Lock mode 2 or toggling between
mode 2 and mode 0
NOTES:
Toggle the lock on and off by pressing and holding the
button, the
seconds.
Press and hold simultaneously.
Making ties
Saving and recalling presets
Setting input audio gain and attenuation
Changing Lock modes
Setting video and audio output mutes
Setting audio output volume
The switcher is shipped in Lock mode 2.
• If the switcher is in Lock mode 0 or mode 1, this
procedure selects mode 2.
•
If the switcher is in Lock mode 2, this procedure selects
mode 0 (unlocks the switcher).
button, and the
Video
I / O
ENTER VIDEO AUDIO
2 seconds
I / O
VIDEO AUDIO
ENTER
The buttons blink twice.
Release the buttons.
CrossPoint / MAV Matrix Switchers • Operation
button for approximately 2
Audio
Enter
11