Operator Message Listing - Kodak Microimager 990 User Manual

Operator message listing

Code Operator Message Displayed
E000 Memory battery low — call service
E100 Please wait
E101 Auto shut off, press RUN
E102 Press STOP and try again
E103 Select valid mode
E104 Function not available
E105 Low film warning
E106 Warning — document length error
E107 Warning — skewed document
E108 Low battery warning — upper cass
E109 Low battery warning — lower cass
E110 Upper lamp warning, press RUN
E111 Lower lamp warning, press RUN
E112 Invalid patch level
E113 Enter correct image address
E114 Check current level
E115 Verify correct cassettes
6-2
Description/Action Required
Call service — do not turn off the machine.
No action required. Wait for the message to
clear.
Press Run to continue. Feed documents.
Press Stop and try again.
Invalid mode selected. Enter function code
F01 to select another mode.
Invalid function code entered. Enter a valid
function code.
Low film in cassette(s). Enter function code
F30 to determine how much film remains.
Press Run to continue filming or begin
filming on a new roll.
Check the document length to see if it is
shorter than the minimum or longer than the
maximum allowed refeed the document.
Refeed the document.
Replace the upper cassette battery.
Replace the lower cassette battery.
Press Run to continue. Change the lamps
when the current set of documents have
been processed.
Press Run to continue. Change the lamps
when the current set of documents have
been processed.
Invalid patch was used. Feed correct patch.
Use the Next key to enter the correct image
address.
Conflicting input regarding the proper level
was received. Check the current document
image level.
Verify that both cassettes are to be used
together before proceeding with filming
mode setup.
A-61096 June 1999