Table of Contents
Advertisement
The lower roller
assembly area
A-61096 June 1999
To clear the lower roller assembly area (Area C):
1. Open the top cover.
2. Open the right-side access door.
Lower roller
assembly
3. Turn the vertical baffle handle latch counterclockwise to unlatch the
baffle plate. Lower the baffle plate until it stops. This unlocks the
lower roller assembly.
4. Grasp the lower roller assembly handle (as shown) and slide the
assembly toward the rear of the machine.
5. Remove any documents or document pieces.
IMPORTANT: Do not slide the lower roller assembly back into
place without first removing the imaging guides.
Failure to remove them first can cause misalignment
and/or damage to the machine.
6. Remove the imaging guides (not shown in this illustration).
IMPORTANT: Use care when handling the imaging guides. Hold
the imaging guides by the green handles only.
7. Slide the lower roller assembly back into place.
8. Raise the plate into its original position. Turn the vertical baffle
latch clockwise to lock the baffle plate into position. Be sure the
baffle plate is securely locked into its original position.
9. Replace the imaging guides.
10. Close the right-side access door and top cover.
Vertical baffle
handle
Baffle plate
7-9
Advertisement
Table of Contents
