Operator Message Listing - Kodak Imagelink 900 User Manual

Operator message listing

Code Operator Message Displayed
E000 Memory battery low - call service
E100 Please wait
E101 Auto shut off, press RUN
E102 Press STOP and try again
E103 Select valid mode
E104 Function not available
E106 Warning - document length error
E107 Warning - skewed document
E110 Upper lamp warning, press RUN
E111 Lower lamp warning, press RUN
E112 Invalid patch level
E113 Enter correct Image Address
E114 Check current level
E117 Enter correct level/Image Address
E118
E119
E120 Diagnostic running - do not use
6-2
Description/Action Required
Call service - do not turn off the machine.
No action required.
Wait for the message to clear.
Press the Run key to continue.
Feed documents.
Press the Stop key and try again.
Invalid mode selected.
Enter function code F01 to select another mode.
Invalid function code entered.
Enter another function code.
Check the document length to see if it is shorter
than the minimum or longer than the maximum
allowed.
Refeed the document.
Refeed the document.
Press the Run key to continue.
Change the lamps when the current set of
documents has been processed.
Press the Run key to continue.
Change the lamps when the current set of
documents has been processed.
Invalid patch was used.
Feed correct patch.
Use the NEXT key to enter correct Image Address.
Check the current document image level.
Conflicting input regarding the proper level was
received.
Document image level assignment and next Image
Address input conflict.
Specify another document image level, or use the
NEXT key to enter a valid Image Address.
Please do not use; the machine is being serviced.
A-41069 January 1993