Kodak Microimager 990 User Manual page 56

Code Function Code Name
F71 Omit Length Checking on
the Next Document Only
F72 Skew Detection
F73 Latched Scanning Flag
F74 Momentary Scanning Flag
F75 Footswitch Confirmation
Tone
F80 Document Sorter On/Off
F81 Sort Next Document only
to Specified Bin
F82 Sort All Documents to
Specified Bin
A-61096 June 1999
Allows you to omit length checking on the next document
scanned. Length monitoring will resume on subsequent
documents. Enter 1 to turn on or 0 to turn off, then press
Enter.
Allows you to turn skew detection on or off which
monitors the amount of skew using predefined skew
angle(s). Enter 1 to turn on or 0 to turn off, then press
Enter.
Allows you to set a flag in the image headers which alerts
the host system that this document, and those which
follow, are of special interest. The flag will remain
activated for every document until it is turned off. Enter 1
to turn on or 0 to turn off, then press Enter.
Allows you to set a flag in the image header which alerts
the host system that this document is of special interest.
This flag is set only for that one document. Enter 1 to turn
the momentary scanning flag on, then press Enter.
Allows you to turn the confirmation tone on or off which
informs you when the Footswitch is pressed and/or
released. Enter 1 to turn on or 0 to turn off, then press
Enter.
Allows you to turn the Document Sorter on or off. Enter 1
to turn on or 0 to turn off, then press Enter.
Allows you to sort the next document only into the
specified bin (lower, upper or next). Press the Up arrow
to scroll through the bins in an upward order, or press the
Down arrow to scroll through the bins in a downward
order. After the selection is made, press Enter.
Allows you to sort all documents into the specified bin
Iower, upper, next or remove override). Press the Up
arrow to scroll through the bins in an upward order, or
press the Down arrow to scroll through the bins in a
downward order. After the selection is made, press
Enter.
Description
4-11