Table of Contents
Advertisement
Pausing and resuming
scanning
Using the Operator
Control Panel
touchscreen
A-61868 November 2016
NOTE: If your scan job requires a temporary override (e.g., printing,
patch reading, multifeed detection, etc.), then the auto start
option must be disabled prior to starting your scan job to allow
access to the Overrides screen.
Alternatively, pressing Stop/Pause while scanning will also
provide access to the Batch Overrides screen.
For more information, see "Overrides" on page 49.
4. Touching any of the options displayed on the Scanning screen will perform
the action (only for Omit Multifeed Detection) on the next document only.
To perform these actions for the rest of the scan job, see "Overrides" on
page 49.
5. You must press the Start/Resume button to begin scanning if auto start
has been disabled by the scanning application.
You can manually stop/pause and start/resume the scanner while scanning
documents.
• To temporarily pause scanning, touch the Stop/Pause button on the
scanner once.
• If you want to stop scanning, you can touch Stop on the Operator Control
Panel touchscreen, or press the Stop/Pause button twice.
• Press the Start/Resume button on the scanner to restart scanning after it
has been paused.
NOTE: If your PC does not meet the minimum requirements, the scanner may
automatically pause during scanning and resume scanning when
enough internal buffer memory is free.
There are a variety of options that can be accessed by using the Operator
Control Panel touchscreen.
If there is an arrow after the option, another screen will be
displayed allowing you to make additional choices.
If there is a checkbox next to the option, you can check and
uncheck this box to turn an option On or Off.
For example, if a checkmark is in the Rear Exit checkbox, this
indicates that the Rear Exit is Open on the scanner.
Use the Up and Down arrows to scroll through the list of options
displayed on the Operator Control Panel.
For more information and procedures for using these options, see the sections
that follow.
To navigate through the touchscreen, touch the desired option with your finger.
Using any object other than your finger may damage the touchscreen and void
your warranty.
27
Advertisement
Table of Contents
