Table of Contents
Advertisement
Replacing the imaging
guides
5-28
To replace the imaging guides, follow the steps below:
1. Open the right-side access door.
IMPORTANT: Use care when handling the imaging guides. Hold
the imaging guides by the green handles only.
2. Locate and grasp the end of the upper imaging guide. Carefully
slide the imaging guide out of its track.
3. Locate and grasp the end of the lower imaging guide. Carefully
slide the imaging guide out of its track.
4. Grasp and hold the new lower imaging guide by the green handle
and carefully slide it into place. Make sure the grooves fully
engage the track.
5. Grasp and hold the new upper imaging guide by the green handle
and carefully slide it into place. Make sure the grooves fully
engage the track.
IMPORTANT: The imaging guides are not interchangeable. They
can only be inserted one way .
6. Close the right-side access door.
A-61096 June 1999
Advertisement
Table of Contents
