Kodak Microimager 990 User Manual page 76

Document scanner
Hide thumbs Also See for Microimager 990:
Table of Contents

Advertisement

Replacing the film
cassette battery
A-61096 June 1999
The film cassette battery should be replaced whenever a low battery
symbol appears in the film cassette display or when no film cassette
display appears.
NOTE: For maximum battery life, keep the top cover on the cassette
at all times.
1. Place the film cassette on a flat surface with the battery
compartment cover facing up.
Battery compartment cover
2. Insert the edge of a coin into the slot and carefully pry the battery
compartment cover off by pressing down on the coin.
3. Remove the battery compartment cover and set it aside.
4. Lift the battery out and remove the battery contacts from the
battery connector. Be careful not to damage the flexible or wire
cable.
Flexible cable/
wire cable
5. Insert the battery contacts of a new battery into the battery
connector and lower the battery into the compartment.
6. Replace the battery compartment cover.
Cassette display
Battery
contacts
Use
coin to
open
Slot
Battery
connector
5-19

Advertisement

Table of Contents
loading

Table of Contents