Table of Contents
Advertisement
A-61096 June 1999
6. Rotate the spool counterclockwise to secure the film on the spool.
7. Place the take-up spool over the take-up spindle lugs.
8. Slide the release lever toward the battery compartment and hold it
in this position.
9. Slowly rotate the take-up spool counterclockwise 3 full turns to
secure the film on the spool. Allow the release lever to return to its
normal position.
Release
lever
Battery
compartment
10. Replace the top cover on the cassette. Press down on the cover
latch and turn it clockwise to lock the cover in place.
NOTE: The cassette may now be inserted into the
scanner/microimager and filming may continue.
Take-up
spool
3-11
Advertisement
Table of Contents
