Table of Contents
Advertisement
Unloading a partially
exposed roll of film
A-61096 June 1999
Follow the steps below to unload a partially exposed roll of film
(simplex or duplex format).
IMPORTANT: Do not unload a partially exposed roll of film when using
duo mode. Images will be lost if a partial roll is
unloaded.
It is assumed that all documents have been deposited in the exit
hopper and Stop has been pressed.
1. Enter function code F28 (Film Advance).
2. Open the cassette access door.
3. Swing the drive release lever (green handle) out.
4. Remove the film cassette(s).
5. Place the cassette on a flat surface, with the top cover side up.
6. Press down on the cover latch and turn it counterclockwise to
unlock the cover.
7. Remove the top cover and set it aside.
Release
lever
Battery compartment
8. Slide the release lever toward the battery compartment and hold it
in this position.
Guide roller
Drive roller
Idler roller
Take-up
spool
3-9
Advertisement
Table of Contents
