Select Linked Mode - Kodak Microimager 990 User Manual

Code Function Code Name
F91

Select Linked Mode

F92 Fixed Field
F93 Action/Confirmation Tone
F94 Level 1
F95 Level 2
F96 Level 3
F97 Next Image Address
F98 Stop
F99 Run
4-12
Allows you to switch from one application mode to
another, keeping the last image address. Enter the
number of the application mode you wish to select, then
press Enter.
F91 in NO Film mode: When you use F91 in No Film
mode, you can:
•
Link two filming modes as long as the index format,
image address fields (number of fields and field
lengths) and Film modes match. When the modes
link, a message is not displayed because two modes
of the same type are being linked. If they do not
match, the link cannot be made and a message is
displayed.
•
Link a scanning mode to a filming mode and vice
versa as long as the index format and image address
fields (number of fields and field lengths) match.
When the modes link, an E200 message is displayed
because two different modes are being linked. If the
index formats and image address fields do not match,
the link cannot be made and a message is displayed.
When linking a scanning mode with a filming mode,
you must make sure the link was made.
•
Link two scanning modes as long as the index format
and image address fields (number of fields and field
lengths) match. When the modes link, a message will
not be displayed because two modes of the same
type are being linked.
Allows you to enter a new fixed field value containing
alphanumeric characters.
Allows you to hear the pitch of the alarm tone.
Allows you to assign Level 1 to the next document fed
into the transport.
Allows you to assign Level 2 to the next document fed
into the transport.
Allows you to assign Level 3 to the next document fed
into the transport.
Allows you to input the next image address. Enter the
next image address, then press Enter.
Allows you to stop the transport.
Allows you to turn on the transport.
Description
A-61096 June 1999