Table of Contents
Advertisement
Cleaning the mirrors
Cleaning the cabinet
A-61096 June 1999
Inspect the mirrors at least once a week for dust and smudges. Use a
soft bristle brush to remove any dust. Use a soft, lint-free cloth slightly
dampened with water to wipe off any smudges.
IMPORTANT: Do not remove or reposition any of the mirrors. Do not
rub the mirrors with a dry cloth. Use light pressure to
avoid damaging the mirrors.
Mirrors 1, 2, 3, and 4 are accessible via the left-side access door.
Illustration shows the approximate location of the mirrors.
Mirror 1
Left-side
access door
Mirror 3
Mirrors 5, 6, and 7 are accessible via the right-side access door.
Illustration shows the approximate location of the mirrors.
Handle
Clean the exterior of the scanner/microimager, the feed shelf, and the
hopper area with a soft cloth. Remove any fingerprints, stains, or
stubborn dirt with a cloth dampened with water or a mild cleaning
agent.
Mirror 4
Mirror 7
Mirror 6
Mirror 2
Mirror 5
5-15
Advertisement
Table of Contents
