Power Saver Mode And Turning The Scanner Off - Kodak S2000f Series User Manual

Power saver mode
and turning the
scanner off
18
Initial scan with an Alaris scanning application
Alaris scanning applications are available for download with your scanner
purchase and will allow you to quickly and easily perform common scanning
tasks, such as:
• create a searchable PDF of a printed report
• scan an invoice and store it with your other invoices
• scan a photo to add to a presentation
If you installed an Alaris scanning application, the following steps show you
how to create an output file of your document. For more information about the
scanning options enabled by Alaris scanning applications, refer to the
documentation for your specific application.
1. Put paper in the scanner input tray, face up and lead edge first.
2. Using the scroll bar on the scanner display screen, scroll up or down until
Color PDF appears. (If you are using Capture Pro, choose Scan to PDF.)
3. Using the touch screen, press Color PDF. The document will be scanned.
When you output it, the PDF file with your image(s) will be sent to a folder.
Refer to the documentation for your Alaris scanning application to see
details of the folder location.
Power saver mode: by default, after 15 minutes of inactivity, the scanner will
automatically enter into power saver mode.
To activate the scanner from power saver mode, do one of the following:
• press the Home button
• press the Pause/Resume button, or
• press Cancel on the touch screen
Turning off the scanner: press the Power button for more than one second.
By default, if the scanner is in power saver mode for more than 60 minutes, the
scanner will power off. To power the scanner back on, press the Power button.
NOTE: for instructions on how to adjust the power settings, see"Power" on
page 34.
A-61916 August 2019