Function Code Listing; Select Application Mode; Restore Application Mode; Level 0 - Kodak 5500 User Reference

Function code listing

Code Function Code Name Description
F01 Select Application
Mode
F02 Restore Application
Mode
F04 Count Only On/Off
F05

Accessory Status

F07

Level 0

F08

Last Image Address

F09 Total Document
Counter
FC-4
Allows you to select one of the predefined application
modes. Enter a value from 1–18.
Allows you to restore the current application mode to its
original preprogrammed user-defined status.
Allows you to count the number of documents entering
the scanner without scanning the documents. The Count
Only Counter will be reset to zero (0) when this function
is selected and displayed in the Status Display. All
accessories are inhibited when the Count Only Function
is enabled.
Displays the current status of the optional accessories
(except Footswitch), software functions (Skew Monitor
and Length Monitor), and confirmation tone selections.
The status of the first accessory/function is indicated in
the Status Display. Press the Enter key to display, one
at a time, the status of the next and subsequent
accessories and functions. The various status conditions
are: On Via Fnc Code which indicates that the
accessory, function, or tone is enabled using the
appropriate Function Code; Off Via Fnc Code which
indicates that the accessory, function, or tone is disabled
using the appropriate Function code; or Not Machine Set
which indicates that the noted accessory has not been
software enabled for the scanner.
Allows you to define the next document scanned as a
Level 0 document.
Allows you to display the Image Address of the last
document scanned.
Allows you to display the total number of documents that
have entered the Feeder (Level 3, Level 2, Level 1, or
Level 0 documents). The Total Document Counter may
be preset or reset by entering zero (0) or any valid
number. The Total Document Counter also resets to
zero (0) when 999,999,999 is reached.
A-61075 March 1997