"D" Group: Monitoring Functions
3-3-13 Output Voltage Monitor [d013]
3-3-14 Input Power Monitor [d014]
3-3-15 Integrated Power Monitor [d015]
Displays the output voltage of the inverter.
Parameter
Function name
No.
d013
Output voltage monitor
• Set Motor Incoming Voltage Selection (A082/A282) correctly. The correct value may
not be displayed.
Displays the input power (instantaneous value) of the inverter.
Parameter
Function name
No.
d014
Input power monitor
Displays the integrated power (electric energy) of the inverter.
The conversion of displayed data is performed with Integrated Power Display
Scale (b079).
"d015 display" = "Actual integrated power [kWh]"/"Integrated Power Display
Scale (b079)"
Example) If b079 = 100 and the displayed value is 1,000, the actual integrated
power is 100,000 [kWh].
The integrated power value can be cleared by setting Integrated Power Clear
(b078) to "01".
The integrated power value can also be cleared via terminal input, if "53: KHC
(Integrated power clear)" is allocated to any of the multi-function inputs.
When Integrated Power Display Scale (b079) is set to "1000", up to
"999,000,000" [kWh] can be displayed.
This parameter is saved in the EEPROM when the power is shut off.
Parameter
Function name
No.
d015
Integrated power monitor 0.0 to 9999.
b078
Integrated power clear
b079
Integrated power display
gain
C001 to
Multi-function input 1 to 7
C007
selection
Data
0.0 to 600.0
Data
0.0 to 100.0
Data
Displayed in increments of
the setting unit 1 kW x
(b079)
1000 to 9999
Displayed in increments of
the setting unit 10 kW x
(b079)
100 to 999
Displayed in increments of
the setting unit 1,000 kW x
(b079).
00: Normal
01: Perform integrated
power clear (01 is reset to
00 after the clear)
1. to 1000.
53: KHC (integrated power
clear)
Section 3-3
Default
Unit
setting
-
V
Default
Unit
setting
-
kW
Default
Unit
setting
-
-
00
-
1.
-
-
-
81