Installation/Removal Method Of The Terminal Block Cover - Omron 3G3MX2 User Manual

Step-by-Step Basic Installation
2-3-3

Installation/Removal Method of the Terminal Block Cover

2-3-3-1 Removal method
2-3-3-2 Installation method
Loosen the screw(s) (1 or 2
locations) securing the
terminal block cover.
While pressing here in the direction
of the arrow, pull the terminal block
cover downward to remove.
The terminal block cover is secured with one screw at the bottom right for 3.0
kW and smaller models, or with two screws on both sides for 3.7 kW and
larger models.
The optional board cover is affixed with screws onto the terminal block cover,
but it is not affixed onto the main unit. Accordingly, the terminal block cover
can be removed without removing the optional board cover.
Follow the removal procedure in reverse. Set the top side of the terminal block
cover onto the main unit and push in the cover until you hear a "click" sound.
Optional board cover
8.8.8.8.
Terminal block cover
Terminal block cover screw
(1 location for 3.0 kW and smaller models)
Section 2-3
While pressing the bottom of the
terminal block cover in the direction
of the arrow, pull the terminal block
cover downward to remove.
8.8.8.8.
Terminal block cover screw
(2 locations for 3.7 kW and larger models)
33