Uid_Control Parameters; Uid_Control Errors; Insert_Virtual_Media; Insert_Virtual_Media Parameters - HP Integrated Lights-Out User Manual

UID_CONTROL Parameters

UID determines the state of the UID. A value of "Yes" turns the UID light on,
and a value of "No" turns the UID light off.

UID_CONTROL Errors

The possible UID_CONTROL error messages include:

INSERT_VIRTUAL_MEDIA

This command notifies iLO of the location of a diskette image. The
INSERT_VIRTUAL_MEDIA command must display within a RIB_INFO
element, and RIB_INFO must be in write mode.
Example:

INSERT_VIRTUAL_MEDIA Parameters

DEVICE specifies the Virtual Media device target. The possible values are
FLOPPY or CDROM. If the DEVICE is not specified, FLOPPY is assumed. This
value is case-sensitive.
IMAGE_URL specifies the URL to the diskette image. The URL format is as
follows:
UID is already ON.
UID is already OFF.
<RIBCL VERSION="2.0">
<LOGIN USER_LOGIN = "adminname" PASSWORD =
"password">
<RIB_INFO MODE = "write">
<INSERT_VIRTUAL_MEDIA "FLOPPY" IMAGE_URL =
"http://servername/path/to/file"/>
</RIB_INFO>
</LOGIN>
</RIBCL>
Remote Insight Command Language 325