HP Integrated Lights-Out User Manual page 342

342 User Guide Integrated Lights-Out
Web Server Non-SSL Port
The embedded Web server in iLO is configured by default to use port 80 for
unencrypted communications. This port setting is configurable in the Global
Settings option of the Administration tab.
Web Server SSL Port
The embedded Web server in iLO is configured by default to use port 443 for
encrypted communications. This port setting is configurable in the Global
Settings option of the Administration tab.
Virtual Media Port
The Virtual Media support in iLO uses a configurable port for its
communications. This port can be set in the Global Settings option of the
Administration tab. The default setting is to use port 17988.
Remote Console Port
The iLO Remote Console is configured by default to use port 23 for Remote
Console communications. This port setting is configurable in the Global Settings
option of the Administration tab.
Terminal Services Port
The Terminal Services port is the port that iLO uses to communicate with
Terminal Services pass-through software on the server. The iLO Terminal
Services pass-through is configured by default to use port 3389 for encrypted
communications. If the Terminal Services pass-through port is configured to
anything other than the default, the port number in Windows® 2000 must be
manually changed to match it. This port setting is configurable in the Global
Settings option of the Administration tab.
Secure Shell (SSH) Port
The iLO Secure Shell (SSH) Port is configured by default to use port 22 for SSH
communications. This port setting is configurable in the Global Settings option
of the Administration tab. Valid values are from 1 to 65535.