Port Matching - HP Integrated Lights-Out User Manual

228 User Guide Integrated Lights-Out
1. Select SNMP/Insight Manager Settings in the Administration tab of the
2. Configure iLO as a managed device for Insight Manager 7. Adding iLO to

Port Matching

Insight Manager 7 is configured to start an HTTP session to check for iLO at port
80. The port can be changed. If you want to change the port number, you must
also change it in Network Settings and Insight Manager 7.
iLO navigation frame to enable SNMP alerting and to provide an SNMP trap
IP address to iLO. This IP address should be the address of the computer
running Insight Manager 7. Refer to the "Enabling SNMP Alerts (on page
96)" section for details.
Insight Manager 7 enables the NIC interface on iLO to function as a
dedicated management port, isolating management traffic from the remote
host server NIC interface.
a. Start Insight Manager 7. Click Settings. By default, the Automatic
Discovery screen is displayed. Use this screen to discover any iLO that
will be managed by Insight Manager 7. If the IP address does not already
appear in the Ping Inclusion Ranges section, enter the IP address.
b. Click Execute Discovery Now to add iLO to Insight Manager 7. The
Status section displays the system being updated.
c. After the discovery is complete, subsequent queries will display the
device as a management processor.
d. You might need to select Edit Device from the Discovery tab and edit
the monitor community string (for example, by changing it to "public")
so that iLO is displayed in the list of monitored devices.
e. iLO traps are displayed in a query for major, uncleared events. You can
click the orange button at the top of the screen to issue this query. Click
the event description to obtain further information about the event.
NOTE: HP Insight Agents for iLO must be installed on the remote host
server to enable management of iLO. Refer to "Installing iLO Device
Drivers (on page 24)" for additional details about installing and
configuring agents.