Hpqlomgc Command Language - HP Integrated Lights-Out User Manual

220 User Guide Integrated Lights-Out
9. Select the query that had been created earlier, for example "Mgmt
10. Click Schedule to define when the Application Launch task will run. A
11. Click OK to set the schedule.
12. Click Finish to save the Application Launch task.
13. Click the Execute a Task icon (the green triangle) to execute the Group

HPQLOMGC Command Language

When using HPQLOMGC, the directory settings for the management processor
are read from an XML file. The script used is a subset of the RIBCL and has
been extended to support multiple management processor firmware images. For
more information concerning RIBCL for your management processor, refer to
the RILOE, RILOE II, or iLO user guide.
The following is an example of an XML file:
Processors."
schedule configuration window is displayed.
NOTE: The default schedule for a control task is Now.
Administration.
<RIBCL VERSION="2.0">
<LOGIN USER_LOGIN="user" PASSWORD="password">
<DIR_INFO MODE="write">
<ILO_CONFIG>
<UPDATE_RIB_FIRMWARE
IMAGE_LOCATION="C:\fw\ilo140.brk" />
</ILO_CONFIG>
<RILOE_CONFIG>
<UPDATE_RIB_FIRMWARE IMAGE_LOCATION="C:\fw\riloe.brk"
/>
</RILOE_CONFIG>
<RILOE2_CONFIG>
<UPDATE_RIB_FIRMWARE
IMAGE_LOCATION="C:\fw\riloeii.brk" />
</RILOE2_CONFIG>
<MOD_DIR_CONFIG>
<DIR_AUTHENTICATION_ENABLED value="YES" />
<DIR_LOCAL_USER_ACCT value="YES" />