Hotkey_Config; Hotkey_Config Parameters - HP Integrated Lights-Out User Manual

304 User Guide Integrated Lights-Out

HOTKEY_CONFIG

The HOTKEY_CONFIG command configures the remote console hot key
settings in iLO. For this command to parse correctly, the command must appear
within a RIB_INFO command block, and RIB_INFO MODE must be set to
write. The user must have the configure iLO privilege to execute this command.
Uppercase letters are not supported, and they will be converted automatically to
lowercase. If either a double quote or a single quote is used, it must be different
from the delimiter. Specifying a blank string removes the current value.
Refer to the "Supported Hot Keys" section for a complete list of supported
hotkeys.
Example:
</RIBCL>

HOTKEY_CONFIG Parameters

All of the following parameters are optional. If a parameter is not specified, then
the parameter value for the specified setting is preserved.
CTRL_T specifies settings for the CTRL_T hot key. The settings must be
separated by commas. For example, CTRL_T="CTRL,ALT,ESC." Up to
five keystrokes can be configured for each hot key.
<RIBCL VERSION="2.0">
<LOGIN USER_LOGIN="adminname" PASSWORD="password">
<RIB_INFO MODE="write">
<HOTKEY_CONFIG>
<CTRL_T value="CTRL,ALT,ESC"/>
<CTRL_U value="L_SHIFT,F10,F12"/>
<CTRL_V value=""/>
<CTRL_Y value=""/>
<CTRL_X value=""/>
<CTRL_Y value=""/>
</HOTKEY_CONFIG>
</RIB_INFO>
</LOGIN>