Incorrect Time Or Date Of The Entries In The Event Log; Network Flash Recovery; Inability To Upgrade Ilo Firmware - HP Integrated Lights-Out User Manual

Incorrect Time or Date of the Entries in the Event Log

You can update the time and date on iLO by running the RBSU. This utility
automatically sets the time and date on the processor using the server time and
date. The time and date are also updated by Insight Management agents on
supported network operating systems.

Inability to Upgrade iLO Firmware

If you attempt to upgrade the iLO firmware and it does not respond, does not
accept the firmware upgrade, or is terminated before a successful upgrade, the
following options are available:
iLO Network Flash Recovery
The iLO network flash recovery payload enables you to recover from a failed
firmware upgrade. The flash recovery payload uses FTP, which can only be used
when the flash recovery payload is active, to transfer the firmware image to iLO.
The flash recovery payload should only be used if:
If the iLO firmware image is damaged, missing, or otherwise corrupted, then the
iLO flash recovery process is used to re-flash iLO. The flash recovery process is
for the sole purpose of getting the system re-flashed. No other processes can be
run until the recovery process is complete.
Diagnostic Steps
Before attempting a flash recovery of the firmware, use the following diagnostic
steps to verify that flash recovery is needed:
iLO network flash recovery
ROMPaq
Previous firmware upgrade attempts have failed.
You are unable to connect to the Web browser.
No other firmware upgrade option is available. Servers with a floppy drive
can use the ROMPaq option. ProLiant BL p-Class servers must use the flash
recovery payload.
Troubleshooting iLO 391