HP Integrated Lights-Out User Manual page 219

To create an Application Launch task:
1. Click Device in the navigation bar on the top left side of the screen.
2. Click Tasks to open the Tasks screen.
3. Click New Control Task. A dropdown menu is displayed.
4. Click Application Launch from the dropdown menu to open the Create/Edit
Task screen.
5. Enter the full path and name for the Lights-Out Migration Command Line
Utility in the area provided. For example, if the HPQLOMGC.exe file is in
the root directory of the C drive, then the path is: C:\HPQLOMGC.exe.
6. Enter the parameters in the area provided.
Command line switches enable you to designate items such as the
management processor to be upgraded, the XML file to be used, and where a
log file is generated.
-S <network address>—This switch contains the IP address or DNS name
of the management processor. By default, the IP address of the management
processor is automatically provided. The environment variable
<DEVICEIPADDRESS0> can also be used to specify a network address.
Use the -S switch to override the default behavior. If present, this switch has
precedence over the IP address environment variable
<DEVICEIPADDRESS0>.
-F <filename>—This switch contains the path of the XML file that has the
management processor directory settings and the location of the firmware
images. This switch causes an error if an IP address is not designated.
-A—This switch uses the network name for the name of the device object
created in the directory.
-V—This switch is optional and sets the HPQLOMGC to Verbose mode.
-L <filename>—This switch defines where the log file is generated. This
switch causes an error if an IP address is not designated.
-Q—This switch is optional and sets the HPQLOMGC to Quiet mode.
7. Click Next. A screen is displayed with options for naming the task, defining
the query association, and setting a schedule for the task.
8. Enter a task name in the Enter a name for this task field.
Lights-Out Directories Migration Utilities 219