Options Window Parameters - HP NetServer AA 6200 Administrator's Manual

Parameter
Time in seconds to automatically
poll for the system status
Time in seconds to automatically
re-execute Show commands
IOP1
IOP2
Display Last Mirror Copy Status
in a separate window
Display Device Status in a
separate window
Save On Exit
Endurance Manager
Table 4-9 Options Window Parameters
Description
Specifies the interval to poll and update Endurance server state
and status information. The default is 5 seconds. If this field is blank
or 0, Endurance Manager does not perform an automatic update.
Specifies the interval to update any open Show command
windows. The default is 3 seconds. If this field is blank or 0,
Endurance Manager does not perform an automatic update.
Enables you to choose which IOP(s) to poll and update Endurance
server information. When running Endurance Manager:
• On the CE or a remote workstation, IOP1 and IOP2 are selected
by default. This means that IOP1 is polled first. If IOP1 is
available, Endurance Manager displays the Endurance server
status as reported by IOP1. If IOP1 is unavailable, Endurance
Manager displays the status as reported by IOP2.
• On an IOP, each IOP polls itself by default. This means that
Endurance Manager displays the Endurance server as reported
by the local IOP.
Displays the Last Mirror Copy Status window in a separate window
when this option is enabled (check mark is displayed). For Last
Mirror Copy Status window information, refer to
Status Window (page
Displays the Device Status window in a separate window when this
option is enabled (check mark is displayed). For Device Status
window information, refer to
The Save On Exit check box saves your current selections,
including the position of the dialog boxes on your screen, when you
exit the Endurance Manager.
4-14).
Device Status Window (page
Last Mirror Copy
4-12).
4-19