Upgrading Firmware On Management Processors - HP Integrated Lights-Out User Manual

210 User Guide Integrated Lights-Out
4. Enter your Login Name>Password and click Find.

Upgrading Firmware on Management Processors

The upgrade firmware screen enables you to update the management processors
to the firmware version that supports directories. This screen also enables you to
designate the location of the firmware image for each management processor by
either typing the path or clicking Browse.
Management Processor
RILOE
RILOE II
iLO
The upgrade process might take a long time, depending on the number of
management processors selected. The firmware upgrade of a single management
processor can take as long as five minutes to complete. If an upgrade fails, a
message is displayed in the Results column and HPQLOMIG continues to
upgrade the other discovered management processors.
To upgrade the firmware on your management processors:
1. Select the management processors to be upgraded.
2. For each discovered management processor type, enter the correct pathname
IMPORTANT: The HPQLOMIG wizard assumes a common user name
and password for management processors are employed. If unique user
names and passwords are used, the command line version of the
migration utility should be used.
IMPORTANT: Binary images of the firmware for the management
processors are required to be accessible from the system that is running
the migration utility. These binary images can be downloaded from the
H (http://www.hp.com/servers/lights-out)P website.
IMPORTANT: HP recommends testing the upgrade process and
verifying the results in a test environment before running the utility on a
production network. An incomplete transfer of the firmware image to a
management processor could result in having to locally reprogram the
management processor using a floppy diskette.
to the firmware image or browse to the image.
Minimum Firmware Version
2.50
1.10
1.40