Mod_Global_Settings Parameters - HP Integrated Lights-Out User Manual

MOD_GLOBAL_SETTINGS Parameters

All of the following parameters are optional. If a parameter is not specified, then
the parameter value for the specified setting is preserved.
SESSION_TIMEOUT determines the maximum session timeout value in
minutes. The accepted values are 15, 30, 60 and 120.
ILO_FUNCT_ENABLED determines if the Lights-Out functionality is enabled
or disabled for iLO. The possible values are "Yes" or "No." It is case insensitive.
F8_PROMPT_ENABLED determines if the F8 prompt for ROM-based
configuration is displayed during POST. The possible values are "Yes" or "No."
<RIBCL VERSION="2.0">
<LOGIN USER_LOGIN="adminname" PASSWORD="password">
<RIB_INFO MODE="write">
<MOD_GLOBAL_SETTINGS>
<SESSION_TIMEOUT value="60"/>
<ILO_FUNCT_ENABLED value="Yes"/>
<F8_PROMPT_ENABLED value="Yes"/>
<F8_LOGIN_REQUIRED="Y"/>
<REMOTE_CONSOLE_PORT_STATUS value="2"/>
<REMOTE_CONSOLE_ENCRYPTION value="Y"/>
<PASSTHROUGH_CONFIG value="3"/>
<HTTPS_PORT value="443"/>
<HTTP_PORT value="80"/>
<REMOTE_CONSOLE_PORT value="23"/>
<TERMINAL_SERVICES_PORT VALUE="3389"/>
<VIRTUAL_MEDIA_PORT value="17988"/>
<MIN_PASSWORD VALUE="8"/>
<REMOTE_KEYBOARD_MODEL VALUE="US"/>
<VIRTUAL_MEDIA_PORT value="55"/>
<SSH_PORT value="22"/>
<SSH_STATUS value="YES"/>
<SERIAL_CLI_STATUS value="3"/>
<SERIAL_CLI_SPEED value="1"/>
</MOD_GLOBAL_SETTINGS>
</RIB_INFO>
</LOGIN>
Remote Insight Command Language 295