Snmp/Insight Manager Settings - HP Integrated Lights-Out User Manual

Recovering from a Failed iLO Firmware Update
In the event that an iLO firmware update has failed, there are various recovery
options. For all of these options, you need a current firmware image. HP does not
recommended downgrading iLO firmware, and the version you have could be
corrupt.
1. Download the latest iLO firmware. iLO downloads are available on the HP
2. Determine if the update failed.
3. Attempt to re-flash over the network.
4. If the on-line flash component failed, try the ROMPAQ diskette.

SNMP/Insight Manager Settings

The SNMP/Insight Manager Settings option enables you to configure SNMP
alerts, generate a test alert, and configure integration with Insight Manager 7 and
Systems Insight Manager.
website (http://h18004.www1.hp.com/support/files/lights-out/us/index.html).
a. Can you ping iLO?
b. Can you log in?
c. Does the iLO Option ROM prompt appear during host POST?
d. Are the iLO status LEDs strobing in a regular pattern? Examine the iLO
status LEDs inside the server to see if they are strobing in a regular
pattern from LED 8, 7, 6, 5, 4, 3, 2, 1. If the iLO LED pattern is visible,
proceed to step 4.
You might be able to initiate a firmware update using RIBCL or a browser.
If network flash failed, try the on-line flash component. Components are
available for both Windowst® and Linux.
a. Build the ROMPAQ diskettes and boot the host using disk 1.
b. You might need to set the iLO Security Override Switch for ROMPAQ
to succeed. Restore the Security Override Switch after the flash process
is complete.
Using iLO 95