Cpqlodos Recommended Usage; Cpqlodos General Guidelines; Command Line Arguments - HP Integrated Lights-Out User Manual

250 User Guide Integrated Lights-Out

CPQLODOS Recommended Usage

HP recommends using CPQLODOS /WRITE_XML=filename.ext to
capture the current iLO settings. The output from the /WRITE_XML command
should be used as a template for further CPQLODOS scripting.
For security reasons, the /WRITE_XML command does not output the passwords
for current user accounts or the iLO Advanced Pack license key.
Edit the template file created with the /WRITE_XML parameter to reflect the
desired configuration.
Use CPQLODOS /LOAD_XML=filename.ext to reset the iLO to its factory-
default settings, then apply the settings in the XML scripts file.

CPQLODOS General Guidelines

An opening command opens a database. The database remains open until the
matching closing command is sent. All changes made within a single command
block are applied simultaneously when the database is closed. Any errors within
the block cause the enclosed changes to be discarded.
An example of an opening command and its matching closing command are:
In all examples, the opening and closing commands are displayed.

Command Line Arguments

All of the commands are grouped by functionality. All commands that
manipulate user information are grouped together. Grouping commands allow
the firmware to view the data to be manipulated as a block of information,
similar to a text document, allowing for multithreaded access to the different
kinds of information.
The following table lists the arguments recognized by CPQLODOS.
<USER_INFO>
</USER_INFO>