HP Integrated Lights-Out User Manual page 76

Hp integrated lights-out user guide
Hide thumbs Also See for HP Integrated Lights-Out:
Table of Contents

Advertisement

76
User Guide Integrated Lights-Out
3. Insert the media into the client's CD-ROM drive, select a drive, and click
4. The NetWare 6.5 operating system will automatically detect the new Virtual
When the drive letter shows as mounted, the drive will be accessible through the
server's GUI and the system console.
Mounting USB Virtual Media CD-ROM in Linux
1. Access iLO through a browser.
2. Select Virtual Media in the Virtual Devices tab.
3. Select a CD-ROM to be used and click Connect.
4. Load the USB drivers using the following commands:
5. Load the SCSI CD-ROM disk driver using the following command:
6. Mount the drive using the following command:
Creating an iLO Virtual CD-ROM Image
The iLO Virtual Media feature enables you to create CD-ROM image files
within the same applet. The image files created from the applet will be ISO-9660
file system images. The performance of iLO Virtual CD-ROM is faster when
image files are used.
Connect.
CD-ROM drive, mount it as an NSS volume, and display it as the media's
volume label name. A volume label name will only appear in the NetWare
6.5 operating system if media is present in the Virtual Media CD-ROM
drive. To show the mount status of the new drive, use the volumes
command through the server console.
The virtual CD-ROM can also be mounted as a normal CD-ROM device
using the LOAD CDDVD command.
modprobe usbcore
modprobe usb-storage
modprobe usb-ohci
modprobe sr_mod
mount /dev/scd0
NOTE: Use the man mount command for additional file system types.
/mnt/cdrom –t iso9660

Advertisement

Table of Contents
loading

Table of Contents